CPG

Mohamed A. Abdalla

Tel: + 966 (013) 860-7167
Fax: +966 (013) 860-4447

Location: Bldg. 76, Rm. 1135

Mohamed A. Abdalla

Software Engineer, Department of Petroleum Engineering

Currently working as a Petroleum Engineering Software Engineer at CPG’s Department of Petroleum Engineering, King Fahd University of Petroleum & Minerals, Dhahran, KSA. Previously, worked as a teaching assistant at the petroleum engineering department, University of Khartoum, Sudan. During master degree, I was involved as a research and teaching assistant. I was also an executive member of the Students’ Society of Petroleum Engineers (SSPE) and University of Khartoum Petroleum Engineering Alumni (UoKPEA).

Educational Qualification

  • M.S. in Petroleum engineering [May 2018], King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia.
  • B.S. in Petroleum Engineering [October 2012], University of Khartoum, Khartoum, Sudan

Research Interests

  • Reservoir Engineering
  • Modeling & Optimization
  • Artificial Intelligence
  • Inflow Performance Relationship IPR
  • Hydraulic Fracturing

Selected Publications

  • Abdalla, M., Hassan, A., Abdulraheem, A., Elkatatny, S., & Mohamed, A. (2018). SPE / IADC-189390-MS New Technique to Evaluate the Performance of Hydraulically Fractured Horizontal Wells.
  • Ahmed, M. E., Abdalla, M. (2018). SPE- 192324- MS Investigating the effect of hydraulic fracturing in the pressure transient response for multilateral wells in dry gas reservoirs.
  • Mohamed, A., Abdalla, M., Alnuaim, S., & Fahd, K. (2019). A New Algorithm to Quantify the Productivity of Hydraulically Fractured Horizontal Gas Wells Introduction Reservoir Description and Simulation Model.

Awards & Honors

  • A full scholarship for master’s degree at King Fahd University of Petroleum & Minerals, Dhahran, KSA [2015-2018]

Maksat Orayev

Software Engineer, Department of Petroleum Engineering

Currently working as a Petroleum Engineering Software Engineer at Department of Petroleum Engineering, CPG, King Fahd University of Petroleum & Minerals, Dhahran, KSA. Previously, worked as a workover assistant driller on an offshore SOCAR Azneft “Neft Dashlari” (Oil Rocks) oilfield in Baku, Azerbaijan.

 

 

Educational Qualification

  • M.S. in Petroleum Engineering [January 2024], King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia.
  • B.S. in Petroleum Engineering [June 2019], Baku Higher Oil School, Baku, Azerbaijan

Research Interests

  • Reservoir Simulation and Mathematical Modeling
  • Reservoir Engineering
  • Inverse Modeling
  • Heat Transport in Porous Media

Awards & Honors

  • A full masters scholarship at King Fahd University of Petroleum & Minerals, Dhahran, KSA [2021-2024]
Tel: + 966 (013) 860-1324
Fax: + 966 (013) 860-4447

Location: Bldg. 67, Rm. 1135

Mohamed Attia Elsayed

Software Engineer, Department of Petroleum Engineering

Currently working as a PETE Petroleum Software Engineer at CPG’s Department of Petroleum Engineering, King Fahd University of Petroleum & Minerals, Dhahran, KSA. Previously, working as a Startup Executive, LB, and RA at KFUPM.

Educational Qualification

  • M.S., in Petroleum Engineering, KFUPM, Dhahran, Saudi Arabia, 2013
  • B.S., in Petroleum Engineering, Suez University, Suez, Egypt, 2009

Research Interests

  • Artificial Intelligence
  • Production optimization (Inflow Performance Relationship IPR)
  • Reservoir Engineering

Selected Publications

  • AM Salem, M Attia, A Alsabaa, A Abdelaal, Z Tariq. 2022. Machine Learning Approaches for Compressibility Factor Prediction at High-and Low-Pressure Ranges‏. Arabian Journal for Science and Engineering 47 (9), 12193-12204‏
  • M Mahmoud, M Attia, H Al-Hashim. 2017. EDTA chelating agent/seawater solution as enhanced oil recovery fluid for sandstone reservoirs. Journal of Petroleum Science and Engineering 152, 275-283‏
  • M Attia, MA Mahmoud. ‏2015. Defining the Optimum Properties of Chelating Agents to be used as EOR Fluid for Sandstone Reservoirs. SPE Saudi Arabia Section Annual Technical Symposium and Exhibition‏
  • M Attia, MA Mahmoud. ‏2015. The Impact of Adding High pH Fluid to Sea Water on The Sandstone Rock Charge During EOR Process. SPE Middle East Oil & Gas Show and Conference‏
  • M Attia, MA Mahmoud, HS Al-Hashim, AS Sultan. ‏2014. Shifting to a new EOR area for sandstone reservoirs with high recovery, No damage, and low cost‏. SPE EOR Conference at Oil and Gas West Asia‏
  • MA Mahmoud, MA Gadallah. ‏2013. Modeling of the Change of Rock Petrophysical Properties Due to Sulfur Deposition in Sour Gas Reservoirs. SPE North Africa Technical Conference and Exhibition‏
  • MA Mahmoud, MA Gadallah. ‏2013. New Insights into Evaluating the Damage due to Calcium Sulfate Scale Precipitation during Low and High Salinity Water Injection. North Africa Technical Conference and Exhibition‏
  • M Attia, MA Mahmoud, A Abdulraheem, SA Al-Neaim. 2013. Evaluation of the pressure drop due to multi phase flow in horizontal pipes using fuzzy logic and neural networks. SPE Middle East Oil and Gas Show and Conference

Awards & Honors

  • A full scholarship for a master’s degree at King Fahd University of Petroleum & Minerals, Dhahran, KSA [2011-2013]
Tel: +966 (013) 860-3385

Location: DTV Bldg. 248 (PEGTC), Rm. 227

Rawan Ahmed Al-Shammari

Software Engineer, Laboratory Technical Support & Services

Rawan graduated from University of Hail with a Bachelor Degree in Software Engineering. She joined the Department of Remote Sensing on November 16th in 2022 as a Programmer and as a part of the Multimedia Team. Passionate about Graphic Design, Editing Videos and a little into 3D Modeling.

Educational Qualification

  • B.S. in Software Engineering from University of Hail (2021).

Research Interests

  • AI & Machine Learning.
  • Remote Sensing.
  • VR/AR/MR Technology.
  • 3D Modeling.
X